Audited by an independent third-party inspection agency
R&D Capabilities
The supplier has 2 R&D engineers, you can check the Audit Report for more information
Production Process Visualization
You can check the supplier's production workflow chart or main facilities in the Audit Report
Management Certification
The supplier has quality management system certification, including: ISO9001:2015 certificate ISO45001:2018 certificate ISO14001 ISO50001 ISO 14067:2018
Brief Description:
This conductor is made from aluminium-magnesium
silicon alloy of high electrical conductivity containing enough magnesium silicide to give it better mechanical
properties after treatment. These conductors are generally made out of aluminium alloy 6201.
AAAC CONDUCTOR has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR CONDUCTOR on equal diameter basis.
Applications:
AAAC aluminum alloy conductors are extensively used for overhead distribution and transmission lines
adjacent to ocean coastlines where there can be a problem of corrosion in the steel of an ACSR construction.The inductive effect of the ACSR's steel core is eliminated, hence increasing the operating efficiency of the line.
Features and Benefits:
Aluminum alloy conductors have a number of advantages over the use of the ACSR or all aluminum
conductors. Lower power losses than for equivalent single aluminum-
layer ACSR conductors.
• Simpler fittings than those required for ACSR. • Excellent corrosion resistance in environments conducive to galvanic corrosion in ACSR. • Strength and sag approximately the same as for equivalent 6/1 and 26/7 ACSR conductors. • Outside diameters are the same as for standard ACSR conductors, permitting interchangeability of fittings. • Greater resistance to abrasion than that for 1350 wires in all-aluminum or ACSR conductors. Key Benefits: · High tensile strength as compared to AAC conductor. · Higher conductivity as compared to ACSR conductor. · Better corrosion resistance than ACSR conductor. Physical contents of alluminium alloy : · Density - 2.70 kgm/dm3 at 20°C · Coefficient of Linear Expansion - 23 x 10-6 / °C · Resistivity - 0.0326 Ohms mm2/m at 20°C · Constant Mass Temperature Coefficient (a) - 0.00360/ °C · Material - Heat treated Al. Mg. Si. Alloy
){kind=link}